|
Component％ |
碳C |
矽Si |
锰Mn |
铬Cr |
钼Mo |
钒V |
|
0.38 |
1.0 |
0.4 |
5.0 |
1.3 |
1.0 |
Characteristic: AISIH13/DIN1.2344
Hardness of leaving factory: Softening anneal until HB180-210.
Characters: excellent property of polishing, easy to shave, high flexibility, even in strength from lengthways to transverse, good heat resistance, adapted for aluminum, zinc alloy extrusion dies.
Specification: round (MM) 22-28-32-38-45-50-58-65-75
85-95-105-115-130-155-165-185-205-235
260-280-310-320-330-350-380-410-450-500
Flat (MM)
28X102-130-166-210-260-310-360-410-460-510-560-610-810
35X102-130-166-210-260-310-360-410-460-510-560-610-810
43X105-130-166-206-254-300-350-400-450-500-600-1020
54X105-130-166-206-254-300-350-400-450-500-600-1020
63X105-130-166-206-254-300-350-400-450-500-600-1020
80X105-130-166-206-254-300-350-400-450-500-600-1020
100X105-130-166-206-254-300-350-400-450-500-600-1020
125X105-130-166-206-254-300-350-400-450-500-600-1020
160X105-130-166-206-254-300-350-400-450-500-600-1020
200X105-130-166-206-254-300-350-400-450-500-600-1020
250X105-130-166-206-254-300-350-400-450-500-600-1020
300X105-130-166-206-254-300-350-400-450-500-600-1020
350X105-130-166-206-254-300-350-400-450-500-600-1020 |
