Forging: 1.100～900℃
Anneal: Heat up to 800-850℃ and stay for 2-4 hours in this temperature; then cool it slowly in furnace.
Quenching: Pre-heat up to 550-600℃; then secondarily heat up to 950℃; and again heat up to 1，220～1250℃；b：1，200℃～1230℃; quench in oil but the temperature must be kept in 40-60℃ (a. general tools; b. complex flexible tools)
Backfire: Heat up slowly to 550-570℃ and stay in this temperature; then cool in still air and back fire again.
Hardness: more than HRC63℃;
Uses: This steel is of high-speed tungsten steel. It is adapted for making various wear-resistance and impact-resistance for sharp cutting, high-grade punching dies, screw dies, complex and flexible tools, milling cutters, aiguilles and so on.
Specification
3.2X32-40-50-65-80-105-130-155-205-255-305-380
4.5X32-40-50-65-80-105-130-155-205-255-305-380
6X32-40-50-65-80-105-130-155-205-255-305-380
8X32-40-50-65-80-105-130-155-205-255-305-380
10X32-40-50-65-80-105-130-155-205-255-305-380
13X32-40-50-65-80-105-130-155-205-255-305-380
16X32-40-50-65-80-105-130-155-205-255-305-380
19X32-40-50-65-80-105-130-155-205-255-305-380
22X32-40-50-65-80-105-130-155-205-255-305-380
26X32-40-50-65-80-105-130-155-205-255-305-380
32X32-40-50-65-80-105-130-155-205-255-305-380
38X32-40-50-65-80-105-130-155-205-255-305-380
45X32-40-50-65-80-105-130-155-205-255-305-380
50X32-40-50-65-80-105-130-155-205-255-305-380